UNDER BODY (for 2WD) THREE-DIMENSIONAL DISTANCE

Tech Tips


  • Point B, b, C, c, G, g and J, j on the vehicle are asymmetrical.


  • In cases in which only one dimension is given, left and right are symmetrical.


  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A, a Front Body Mounting Reinforcement Standard Hole φ13 (0.51)
B, b Front Crossmember Installation Nut M12 (0.47)
C, c Front Side Member Standard Hole φ18 (0.71)
D, d Front Suspension Crossmember Installation Nut M14 (0.55)
E, e Front Suspension Crossmember Installation Nut M14 (0.55)
F, f Torque Front Box Standard Hole φ25 (0.98)
G, g Front Side Member Standard Hole φ15 (0.59)
H, h Front Floor Under Reinforcement Standard Hole φ15 (0.59)
J, j Front Floor Reinforcement No. 3 Standard Hole φ18 (0.71)
K, k Rear Floor Side Member Standard Hole φ18 (0.71)
L, l Rear Suspension Member Installation Nut M14 (0.55)
M, m Rear Suspension Member Installation Nut M14 (0.55)
N, n Rear Floor Side Member Standard Hole φ18 (0.71)
A00YIOCE01