REAR FLOOR SIDE MEMBER ASSEMBLY REPLACEMENT



  1. REMOVAL

    Symbol Meaning
    A00YIJD Remove Weld Points
    A00YIL3 Remove Weld Points
    A00YIO0E01

  2. INSTALLATION

    Symbol Meaning
    A00YIJ3 Plug Weld
    A00YIJQ Plug Weld
    A00YIQ0 Assembly Mark

      INSTALLATION POINT

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. For positioning of the new parts, align the installation standard holes of the rear floor side member sub-assembly rear and the member.

    3. After welding, apply undercoating to the corresponding parts. (See the painting / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A00YINXE01