REAR FLOOR UPPER CENTER CROSSMEMBER ASSEMBLY REPLACEMENT

A00YIJO

  1. REMOVAL

    Symbol Meaning
    A00YIJD Remove Weld Points
    A00YILJ Cut with Disc Sander etc.

      REMOVAL POINT

    1. After removing the *1, remove the *2.

    A00YIP7E01

  2. INSTALLATION

    Symbol Meaning
    A00YIJD Remove Weld Points
    A00YIJ3 Plug Weld
    A00YILF Plug Weld

      INSTALLATION POINT

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. If the entire supply part is not needed, remove the part of the supply part that is needed.

    3. *1 is reused.

    4. After welding the *2 the vehicle side, install the *3.

    5. After welding, apply body sealer to the corresponding parts. (See the painting / coating)

    6. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A00YIKWE01
    A00YIIKE01