REAR FLOOR PAN ASSEMBLY REPLACEMENT



  1. REMOVAL

    Symbol Meaning
    A00YIJD Remove Weld Points
    A00YIMR Remove Weld Points
    A00YIL3 Remove Weld Points
    A00YIQNE01

  2. INSTALLATION

    Symbol Meaning
    A00YIJ3 Plug Weld
    A00YIQG Plug Weld
    A00YIJQ Plug Weld

      INSTALLATION POINT(w/o Spare Tire)

    1. Before temporarily installing the new parts, weld the rear floor pan, rear floor panel reinforcement No.2, rear floor pan extension and rear floor panel reinforcement No.1 with the standard number of welding points.

    2. When welding *1, make a hole on a new part for plug welding and weld the panel with the panel behind completely.

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


      INSTALLATION POINT(w/ Spare Tire)

    1. Before temporarily installing the new parts, weld the rear floor pan, rear floor panel reinforcement No.2, rear floor pan extension, rear floor panel reinforcement No.1, rear floor crossmember bracket and spare wheel bracket with the standard number of welding points.

    2. When welding *1, make a hole on a new part for plug welding and weld the panel with the panel behind completely.

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A00YIR2E01
    A00YILVE01
    A00YIJ8E01