BODY DOOR OPENING SIDE REINFORCEMENT CUT AND JOIN REPLACEMENT SECTIONS



  1. REMOVAL

    Symbol Meaning
    A00YIJD Remove Weld Points
    A00YIMR Remove Weld Points
    A00YIL3 Remove Weld Points

      REMOVAL POINT

    1. *1 in the illustration indicates the bolts.

    A00YIKKE01

  2. INSTALLATION

    Symbol Meaning
    A00YIJD Remove Weld Points
    A00YIMR Remove Weld Points
    A00YIL3 Remove Weld Points
    A00YIJ3 Plug Weld
    A00YIQG Plug Weld
    A00YIJQ Plug Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. *1 in the illustration indicates the bolts.

    4. If the entire supply part is not needed, remove the part of the supply part that is needed.

    5. After welding, apply body sealer to the corresponding parts. (See the painting / coating)

    6. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A00YIMLE01