FRONT SIDE MEMBER CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)



  1. REMOVAL

    Symbol Meaning
    A00YIJD Remove Weld Points
    A00YIL3 Remove Weld Points
    A00YIQB Cut and Join Location

      REMOVAL POINT

    1. Carefully cut the front side member inner so not to damage *1.

    Reference Value
    Area Measurement Area Measurement
    *a 65 mm (2.56 in.) *b 57 mm (2.24 in.)
    A00YIJIE01
    A00YIJJE01
    A00YIOSE01

  2. INSTALLATION

    Symbol Meaning
    A00YIJ3 Plug Weld
    A00YIJQ Plug Weld
    A00YILF Fillet Weld
    A00YIQ8 Butt Weld

      INSTALLATION POINT

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A00YIKLE01
    A00YIOYE01