UNDER BODY REFERENCE VALUES THREE-DIMENSIONAL DISTANCE

Tech Tips


  • Measure points with the No. 1 engine under cover and front floor side cover removed.

  • Point A, a, B, b and E, e on the vehicle are asymmetrical.

  • In cases in which only one dimension is given, left and right are symmetrical.

  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A, a Side Rail Reinforcement Installation Bolt M12 (0.47)
B, b Side Rail Reinforcement Installation Bolt M12 (0.47)
C, c Front Suspension Crossmember Installation Bolt M14 (0.55)
D, d Front Suspension Member Rear Brace Installation Bolt M14 (0.55)
E, e Front Side Member Standard Hole φ15 (0.59)
A00YIIZE01