REAR SUSPENSION CROSSMEMBER TWO-DIMENSIONAL DISTANCE

Tech Tips


  • Point C, c on the vehicle are asymmetrical.


  • In cases in which only one dimension is given, left and right are symmetrical.


  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A, a Rear Suspension Crossmember Installation Hole φ24 (0.94)
B, b Rear Suspension No. 1 Lower Arm Installation Hole

23.1X14.2

(0.91X0.56)
C, c Stabilizer Support Standard Hole φ8 (0.31)
D, d Rear Suspension No. 2 Lower Arm Installation Hole φ12.4 (0.49)
E, e Rear Suspension Crossmember Installation Hole φ22.5 (0.89)
A00YIKGE01
A00YIQHE02