WHEN REMOVING,INSTALLING,REPAIRING OR REPLACING PARTS PROCEDURES NECESSARY WHEN CABLE IS DISCONNECTED / RECONNECTED TO BATTERY TERMINAL

Refer to the TOYOTA Repair Manual for each work procedure.

1. PROCEDURES NECESSARY WHEN BATTERY TERMINAL IS DISCONNECTED/RECONNECTED

   Necessary Procedures	Effect/Inoperative Function When Necessary Procedures are not Performed
   Reset back door close position	Power back door function Back door close function

   Note

   After the ignition switch is turned off, the navigation receiver assembly requires approximately a minute to record various types of memory and settings.As a result, after turning the ignition switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.