REAR FLOOR SIDE PANEL(for Wagon) ASSEMBLY REPLACEMENT



  1. REMOVAL

    Symbol Meaning
    A0032OH Remove Weld Points
    A0032FO Remove Weld Points
    A0032C0C01
    *A LH - -
    A0032Q2C01
    *A RH - -

  2. INSTALLATION

    Symbol Meaning
    A0032NI Plug Weld
    A0032NP Plug Weld
    A0032KF Plug Weld

      INSTALLATION POINT(LH)

    1. When welding *a, make a hole on a new part for plug welding and weld the panel with the panel behind completely.

    2. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)

    3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


      INSTALLATION POINT(RH)

    1. Before temporarily installing the new parts, weld the rear floor side panel and sub floor plate with the standard number of welding points.

    2. When welding *a, make a hole on a new part for plug welding and weld the panel with the panel behind completely.

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A0032OMC01
    *A LH - -
    *1 REAR FLOOR SIDE PANEL - -
    A0032NLC01
    *A RH *B Lower Face
    *1 SUB FLOOR PLATE *2 REAR FLOOR SIDE PANEL