BACK DOOR(for Wagon) THREE-DIMENSIONAL DISTANCE
Tech Tips
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Back Door Hinge Installation Hole | φ15 (0.59) |
| B, b | Back Door Dumper Stay Installation Nut | M6 (0.24) |
| C, c | Roof Side Inner Panel Corner | - |
| D, d | Quarter Panel Standard Hole | φ13 (0.51) |
| E, e | Back Door Opening Trough Standard Hole | φ10 (0.39) |
| F, f | Roof Side Inner Reinforcement Corner | - |
| G, g | Back Door Finish Plate Installation Hole | φ8.5 (0.33) |
| H, h | Back Door Lock Striker Installation Nut | M6 (0.24) |
| J, j | Rear Shock Absorber Mounting Bracket Standard Hole | φ13 (0.51) |
| K, k | Rear Shock Absorber Installation Hole | φ25.5 (1.00) |
| L, l | Center Body Pillar Assembly Mark | - |
| *a | Distance between points other than those above | *b | mm (in.) |