FRONT SIDE MEMBER ASSEMBLY REPLACEMENT (PATTERN 1)



  1. REMOVAL

    Symbol Meaning
    A0031WT Remove Weld Points
    A0031L3 Remove Weld Points
    A0031TVC01
    *A LH - -
    A0031JIC01
    *A RH - -

  2. INSTALLATION

    Symbol Meaning
    A0031JY Plug Weld
    A0031UH Plug Weld
    A0031KL Fillet Weld

      INSTALLATION POINT

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. Make sure to attach correctly in accordance with the body dimension diagram as this part affects the front wheel alignment.

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A0031W2C01
    *A LH - -
    *1 FRONT SIDE MEMBER SUB-ASSEMBLY INNER *2 FRONT SIDE MEMBER SUB-ASSEMBLY OUTER
    *a mm (in.) - -
    A0031SHC01
    *A RH - -
    *1 FRONT SIDE MEMBER SUB-ASSEMBLY INNER *2 FRONT SIDE MEMBER SUB-ASSEMBLY OUTER
    *a mm (in.) - -