FRONT FENDER APRON ASSEMBLY REPLACEMENT



  1. REMOVAL

    Symbol Meaning
    A0031WT Remove Weld Points
    A0031ON Remove Weld Points
    A0031L3 Remove Weld Points

      REMOVAL POINT

    1. *a is reused.

    2. After removing the *a, remove the front fender apron sub-assembly.

    A0031P7C01
    *A LH - -
    *1 FRONT FENDER APRON SUB-ASSEMBLY - -
    A0031R2C01
    *A LH - -
    A0031HYC01
    *A RH - -
    *1 FRONT FENDER APRON SUB-ASSEMBLY - -
    A0031FWC01
    *A RH - -

  2. INSTALLATION

    Symbol Meaning
    A0031JY Plug Weld
    A0031EV Plug Weld
    A0031UH Plug Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. Make sure to attach correctly in accordance with the body dimension diagram as this part affects the front wheel alignment.

    4. After welding the front fender apron sub-assembly to the vehicle side, install the *a.

    5. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)

    6. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A0031TTC02
    *A LH - -
    *1 FRONT FENDER APRON SUB-ASSEMBLY - -
    A0031IDC02
    *A LH - -
    A0031UKC02
    *A RH - -
    *1 FRONT FENDER APRON SUB-ASSEMBLY - -
    A0031XFC02
    *A RH - -