UNDER BODY(for Wagon) THREE-DIMENSIONAL DISTANCE


  1. for Torsion Beam Type Suspension

    Tech Tips


    • Point B, b and C, c on the vehicle are asymmetrical.

    • In cases in which only one dimension is given, left and right are symmetrical.

    • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

    Measuring Point Name
    Symbol Name

    Hole Diameter

    mm (in.)
    A, a Front Body Mounting Reinforcement Standard Hole φ10 (0.39)
    B, b Front Crossmember Installation Nut M12 (0.47)
    C, c Front Side Member Standard Hole φ18 (0.71)
    D, d Front Suspension Crossmember Installation Nut M14 (0.55)
    E, e Front Suspension Crossmember Installation Nut M14 (0.55)
    F, f Torque Front Box Standard Hole φ25 (0.98)
    G, g Front Side Rear Member Standard Hole φ22 (0.87)
    H, h Front Side Inner Rear Member Standard Hole φ18 (0.71)
    J, j Front Floor Pan Standard Hole φ18 (0.71)
    K, k Rear Floor Side Member Standard Hole φ25 (0.98)
    L, l Trailing Arm Installation Hole φ15 (0.59)
    M, m Rear Spring Plate Standard Hole φ10 (0.39)
    N, n Rear Floor Side Member Standard Hole φ16 (0.63)
    O, o Towing Hitch Installation Nut M12 (0.47)
    A0031SBC01
    *A Front *B LH
    *C RH - -
    *a Distance between points other than those above *b

    mm

    (in.)

  2. for Double Wishbone Type Suspension

    Tech Tips


    • Point B, b and C, c on the vehicle are asymmetrical.

    • In cases in which only one dimension is given, left and right are symmetrical.

    • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

    Measuring Point Name
    Symbol Name

    Hole Diameter

    mm (in.)
    A, a Front Body Mounting Reinforcement Standard Hole φ10 (0.39)
    B, b Front Crossmember Installation Nut M12 (0.47)
    C, c Front Side Member Standard Hole φ18 (0.71)
    D, d Front Suspension Crossmember Installation Nut M14 (0.55)
    E, e Front Suspension Crossmember Installation Nut M14 (0.55)
    F, f Torque Front Box Standard Hole φ25 (0.98)
    G, g Front Side Rear Member Standard Hole φ22 (0.87)
    H, h Front Side Inner Rear Member Standard Hole φ18 (0.71)
    J, j Front Floor Pan Standard Hole φ18 (0.71)
    K, k Rear Floor Side Member Standard Hole φ25 (0.98)
    L, l Trailing Arm Bracket Installation Nut M12 (0.47)
    M, m Rear Suspension Member Installation Nut M14 (0.55)
    N, n Rear Floor Side Member Standard Hole φ16 (0.63)
    O, o Towing Hitch Installation Nut M12 (0.47)
    A0031V4C01
    *A Front *B LH
    *C RH - -
    *a Distance between points other than those above *b

    mm

    (in.)