BODY PANEL UNDERCOATING(for Sedan) APPLICATION AREAS

CAUTION:

Work must be performed while wearing the appropriate protective gear and in a well-ventilated area.


  1. Apply undercoating to the chassis, floor underside, sheet metal fitting weld points of the body, and inside of the wheel house to prevent rust and noise, as well as protect the body from gravel.

    Note

    Do not coat high temperature areas, such as the tailpipe, or moving parts, such as the drive shaft.

Tech Tips


  • Apply degreasing agent to a clean cloth and clean any dirt and oil from the application areas.

  • Cover the surrounding areas of the application areas with masking paper to avoid coating unnecessary areas.

  • Apply body sealer to the panel joints in advance.

  • Do not leave any gaps between the panel joints.

  • Referring to the notes above, undercoating should be applied according to the specifications for your country.


  1. w/o Floor Under Cover

    A0031DPC01
    *A LH Side *B RH Side

  2. w/ Floor Under Cover

    A0031N6C01
    *A w/o Wheel House Liner *B except 1ND-TV
    *C LH Side *D RH Side
    A0031QYC01
    *A w/ Wheel House Liner *B except 1ND-TV
    *C LH Side *D RH Side
    A0031TCC01
    *A w/o Wheel House Liner *B for 1ND-TV
    *C LH Side *D RH Side
    A0031MTC01
    *A w/ Wheel House Liner *B for 1ND-TV
    *C LH Side *D RH Side