REAR FLOOR PAN(for Sedan) ASSEMBLY REPLACEMENT



  1. REMOVAL

    Symbol Meaning
    A0031WT Remove Weld Points

      REMOVAL POINT

    1. After removing the rear floor side panel sub-assembly, remove the rear floor pan.

    A0031T3C01
    *A LH *B RH
    *1 REAR FLOOR SIDE PANEL SUB-ASSEMBLY *2 REAR FLOOR PAN
    A0031R7C01
    *A LH Side *B RH Side

  2. INSTALLATION

    Symbol Meaning
    A0031JY Plug Weld
    A0031KL Fillet Weld

      INSTALLATION POINT

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. Before temporarily installing the new parts, weld the rear floor pan, spare wheel clamp bracket, rear floor pan reinforcement, weld studs and weld bolts with the standard number of welding points.

    3. After welding the rear floor pan to the vehicle side, install the rear floor side panel sub-assembly.

    4. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)

    5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A0031EMC01
    *A Upper Face *B Lower Face
    *1 WELD STUDS *2 REAR FLOOR PAN
    *3 REAR FLOOR PAN REINFORCEMENT *4 SPARE WHEEL CLAMP BRACKET
    *5 WELD BOLTS - -
    A0031GM
    A0031EAC01
    *A LH Side *B RH Side
    *C LH *D RH
    *1 REAR FLOOR SIDE PANEL SUB-ASSEMBLY - -