Refer to the TOYOTA Repair Manual for each work procedure.
PROCEDURES NECESSARY WHEN BATTERY TERMINAL IS DISCONNECTED/RECONNECTED
| Necessary Procedures | Effect/Inoperative Function When Necessary Procedures are not Performed |
|---|---|
| Memorize maximum steering angle | Simple intelligent parking assist system |
| Operate Back door lock | Power door lock control system (for Hatchback, Wagon) |
| Drive the vehicle until stop and start control is permitted (approximately 5 to 40 minutes) | Stop and start system |
Note
for Sedan Radio and Display Type:
After the ignition switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the ignition switch off, make sure to wait at least 80*1 or 120*2 seconds before disconnecting the cable from the negative (-) battery terminal.
*1: w/ DVD Player
*2: w/o DVD Player
except Sedan Radio and Display Type:
After the ignition switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the ignition switch off, make sure to wait at least 120 seconds before disconnecting the cable from the negative (-) battery terminal.
for Navigation System:
After the ignition switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the ignition switch off, make sure to wait at least 120 seconds before disconnecting the cable from the negative (-) battery terminal.