WHEN REMOVING,INSTALLING,REPAIRING OR REPLACING PARTS REPAIR PROCEDURE OF HEADLIGHT ASSEMBLY

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • If the installation area of the headlight assembly is damaged, use a supply retainer for a low-cost repair.

  • Ensure that the headlight assembly is not damaged.


  1. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER (for Sedan)


    1. A0031UT

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the upper headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of a supply retainer.

    2. A0031RQ

      Install the upper headlight protector retainer with the 2 screws.

  2. INSTALL UPPER NO. 2 HEADLIGHT PROTECTOR RETAINER (for Sedan)


    1. A0031PO

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the upper No. 2 headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of a supply retainer.

    2. A0031PR

      Install the upper No. 2 headlight protector retainer with the 2 screws.

  3. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER LH (for Sedan)


    1. A0031RI

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the upper headlight protector retainer LH against the bosses and gradually file away the old bracket if it interferes with the installation of a supply retainer.

    2. A0031V5

      Install the upper headlight protector retainer LH with the 2 screws.

  4. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER RH (for Sedan)


    1. A0031BK

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the upper headlight protector retainer RH against the bosses and gradually file away the old bracket if it interferes with the installation of a supply retainer.

    2. A0031T2

      Install the upper headlight protector retainer RH with the 2 screws.

  5. INSTALL LOWER HEADLIGHT PROTECTOR RETAINER (for Sedan)


    1. A0031V3

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the lower headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of a supply retainer.

    2. A0031VT

      Install the lower headlight protector retainer with the 2 screws.

  6. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER (except Sedan)


    1. A0031FY

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the upper headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A0031LD

      Install the upper headlight protector retainer with the 2 screws.

  7. INSTALL LOWER HEADLIGHT PROTECTOR RETAINER (except Sedan)


    1. A0031IH

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note

      After cutting off the part, place the lower headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A0031H7

      Install the lower headlight protector retainer with the screw.