FRONT SIDE MEMBER CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)



  1. REMOVAL

    Symbol Meaning
    A0031WT Remove Weld Points
    A0031L3 Remove Weld Points
    A0031EO Cut and Join Location

      REMOVAL POINT

    1. Carefully cut the front side member sub-assembly inner so not to damage *a.

    A0031D8C01
    *A RH - -
    *1 FRONT SIDE MEMBER SUB-ASSEMBLY INNER - -
    *d mm (in.) - -
    A0031ESC02
    *A LH *B RH
    Reference Value
    Area Measurement Area Measurement
    *b 80 mm (3.15 in.) *c 7 mm (0.28 in.)

  2. INSTALLATION

    Symbol Meaning
    A0031JY Plug Weld
    A0031UH Plug Weld
    A0031OI Butt Weld

      INSTALLATION POINT

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)

    3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A0031MHC01
    *A RH - -
    *1 FRONT SIDE MEMBER SUB-ASSEMBLY INNER - -