FRONT DOOR THREE-DIMENSIONAL DISTANCE

Tech Tips


  • Use specification *1 when performing centering measurements for the body dimensions.

  • In cases in which only one dimension is given, left and right are symmetrical.

  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A, a Roof Panel Corner -
B, b Hood Hinge Installation Nut M8 (0.31)
C, c Front Door Hinge Installation Nut M8 (0.31)
D, d Front Door Hinge Installation Nut M8 (0.31)
E, e Front Body Pillar Assembly Mark -
F, f Front Body Pillar Assembly Mark -
G, g Front Body Pillar Assembly Mark -
H, h Rocker Panel Assembly Mark -
J, j Roof Side Rail Assembly Mark -
K, k Rocker Panel Assembly Mark -
L, l Center Body Pillar Assembly Mark -
M, m Center Body Pillar Assembly Mark -
N, n Front Door Lock Striker Installation Nut M8 (0.31)
O, o Rear Door Hinge Installation Nut M8 (0.31)
P, p Rear Door Hinge Installation Nut M8 (0.31)
Q, q Rocker Panel Assembly Mark -
*1 Front Floor Panel Reinforcement Standard Hole φ10 (0.39)
A01IVJNE03
A01IVJLE01