ENGINE COMPARTMENT THREE-DIMENSIONAL DISTANCE


  1. for TMC, TMMR Made

    Tech Tips


    • Point E, e and F, f and H, h on the vehicle are asymmetrical.

    • In cases in which only one dimension is given, left and right are symmetrical.

    • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

    Measuring Point Name
    Symbol Name

    Hole Diameter

    mm (in.)
    A, a Front Fender Installation Nut M6 (0.24)
    B, b Front Spring Support Installation Hole φ12.5 (0.49)
    C, c Hood Hinge Installation Nut M8 (0.31)
    D, d Cowl Panel Installation Nut M6 (0.24)
    E, e Front Side Member Standard Hole φ18 (0.71)
    F Front Side Member Standard Hole φ18 (0.71)
    f Front Side Member Standard Hole φ13 (0.51)
    G, g Radiator Upper Support Installation Nut M6 (0.24)
    H, h Radiator Support Standard Hole φ10 (0.39)
    J Hood Lock Support Installation Nut M6 (0.24)
    K, k Front Fender Apron Extension Standard Hole φ10 (0.39)
    L, l Radiator Upper Support Installation Nut M6 (0.24)
    M, m Radiator Upper Support Standard Hole φ10 (0.39)
    N, n Front Fender Installation Nut M6 (0.24)
    O, o Front Apron to Cowl Side Member Standard Hole φ10 (0.39)
    P, p Front Bumper Reinforcement Installation Nut M10 (0.39)
    A01IVMKE01

  2. for TMMK Made

    Tech Tips


    • Point E, e and F, f and H, h on the vehicle are asymmetrical.

    • In cases in which only one dimension is given, left and right are symmetrical.

    • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

    Measuring Point Name
    Symbol Name

    Hole Diameter

    mm (in.)
    A, a Front Fender Installation Nut M6 (0.24)
    B, b Front Spring Support Installation Hole φ12.5 (0.49)
    C, c Hood Hinge Installation Nut M8 (0.31)
    D, d Cowl Panel Installation Nut M6 (0.24)
    E, e Front Side Member Standard Hole φ18 (0.71)
    F Front Side Member Standard Hole φ18 (0.71)
    f Front Side Member Standard Hole φ13 (0.51)
    G, g Radiator Upper Support Installation Nut M6 (0.24)
    H, h Radiator Support Standard Hole φ10 (0.39)
    J Hood Lock Support Installation Nut M6 (0.24)
    K, k Front Fender Apron Extension Standard Hole φ10 (0.39)
    L, l Radiator Upper Support Installation Nut M6 (0.24)
    M, m Radiator Upper Support Standard Hole φ10 (0.39)
    N, n Front Fender Installation Nut M6 (0.24)
    O, o Front Apron to Cowl Side Member Standard Hole φ10 (0.39)
    P, p Front Bumper Reinforcement Installation Nut M10 (0.39)
    A01IVOGE01