REAR FLOOR SIDE MEMBER ASSEMBLY REPLACEMENT



  1. REMOVAL

    Symbol meaning
    A01IVLP Remove Weld Points
    A01IVUO Remove Weld Points
    A01IVVCE02
    A01IVO1E02
    A01IVNNE02
    A01IVT4E02

  2. INSTALLATION

    Symbol meaning
    A01IVM8 Plug Weld
    A01IVUV Plug Weld
    A01IVW3 Assembly Mark

      INSTALLATION POINT

    1. For positioning of the new parts, align the installation standard holes of the rear floor side rear member and the member.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram)

    3. After welding, apply undercoating to the corresponding parts. (See the painting / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A01IVOBE05
    A01IVSPE05
    A01IVRCE02
    A01IVLYE02