FRONT FENDER FRONT APRON ASSEMBLY REPLACEMENT



  1. REMOVAL

    Symbol meaning
    A01IVLP Remove Weld Points
    A01IVVF Remove Weld Points
    A01IVUO Remove Weld Points
    A01IVVAE01
    A01IVK2E01

  2. INSTALLATION

    Symbol meaning
    A01IVRU Spot Weld
    A01IVM8 Plug Weld
    A01IVTR Plug Weld
    A01IVUV Plug Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. When welding *1, make a hole on a new part for plug welding and weld the panel with the panel behind completely.

    4. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A01IVR0E01
    A01IVSIE01