ENGINE COMPARTMENT REFERENCE VALUES THREE-DIMENSIONAL DISTANCE


  1. for TMC, TMMR Made

    Tech Tips


    • Measure points with the cool air intake duct seal removed.

    • In cases in which only one dimension is given, left and right are symmetrical.

    • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

    Measuring Point Name
    Symbol Name

    Hole Diameter

    mm (in.)
    A, a Radiator Upper Support Standard Hole φ10 (0.39)
    B, b Headlight Installation Screw -
    C, c Front Fender Installation Bolt M6 (0.24)
    D, d Front Fender Installation Bolt M6 (0.24)
    E, e Front Fender Installation Bolt M6 (0.24)
    A01IVQ0E01

  2. for TMMK Made

    Tech Tips


    • Measure points with the cool air intake duct seal removed.

    • In cases in which only one dimension is given, left and right are symmetrical.

    • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

    Measuring Point Name
    Symbol Name

    Hole Diameter

    mm (in.)
    A, a Radiator Upper Support Standard Hole φ10 (0.39)
    B, b Headlight Installation Screw -
    C, c Front Fender Installation Bolt M6 (0.24)
    D, d Front Fender Installation Bolt M6 (0.24)
    E, e Front Fender Installation Bolt M6 (0.24)
    A01IVPKE01