UNDER BODY TWO-DIMENSIONAL DISTANCE


  1. for TMC, TMMR Made

    Tech Tips


    • Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

    • Point O, o and P, p on the vehicle are asymmetrical.

    • In cases in which only one dimension is given, left and right are symmetrical.

    • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

    Measuring Point Name
    Symbol Name

    Hole Diameter

    mm (in.)
    A, a Front Bumper Reinforcement Installation Nut M10 (0.39)
    B, b Front Crossmember Standard Hole φ13 (0.51)
    C, c Front Side Member Standard Hole φ18 (0.71)
    D, d Front Suspension Member Installation Nut M16 (0.63)
    E, e Front Spring Support Installation Hole φ12.5 (0.49)
    F, f Front Suspension Member Installation Nut M16 (0.63)
    G, g Torque Box Front Standard Hole φ25 (0.98)
    H, h Front Side Member Standard Hole φ18 (0.71)
    J, j Front Floor Under Reinforcement Standard Hole φ15 (0.59)
    K, k Strut Bar Installation Hole φ12 (0.47)
    L, l Rear Floor Side Member Standard Hole φ18 (0.71)
    M, m Rear Suspension Member Installation Nut M12 (0.47)
    N, n Rear Spring Support Installation Hole φ9.5 (0.37)
    O, o Rear Floor Side Member Standard Hole φ18 (0.71)
    P, p Rear Floor Side Member Standard Hole φ18 (0.71)
    Wheel Base
    Wheel Base 2775 mm (109.25 in.)
    A01IVP3E03
    A01IVSHE03

  2. for TMMK Made

    Tech Tips


    • Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

    • In cases in which only one dimension is given, left and right are symmetrical.


    • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

    Measuring Point Name
    Symbol Name

    Hole Diameter

    mm (in.)
    A, a Front Bumper Reinforcement Installation Nut M10 (0.39)
    B, b Front Crossmember Standard Hole φ13 (0.51)
    C, c Front Side Member Standard Hole φ18 (0.71)
    D, d Front Suspension Member Installation Nut M16 (0.63)
    E, e Front Spring Support Installation Hole φ12.5 (0.49)
    F, f Front Suspension Member Installation Nut M16 (0.63)
    G, g Torque Box Front Standard Hole φ25 (0.98)
    H, h Front Side Member Standard Hole φ18 (0.71)
    J, j Front Floor Under Reinforcement Standard Hole φ15 (0.59)
    K, k Strut Rod Installation Nut M12 (0.47)
    L, l Rear Floor Side Member Standard Hole φ18 (0.71)
    M, m Rear Suspension Member Installation Nut M12 (0.47)
    N, n Rear Spring Support Installation Hole φ9.5 (0.37)
    O, o Rear Floor Side Member Standard Hole φ18 (0.71)
    P, p Rear Floor Side Member Standard Hole φ18 (0.71)
    Wheel Base
    Wheel Base 2775 mm (109.25 in.)
    A01IVW8E02
    A01IVK6E01