LUGGAGE DOOR THREE-DIMENSIONAL DISTANCE


  1. for TMC, TMMR Made

    Tech Tips


    • In cases in which only one dimension is given, left and right are symmetrical.

    • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

    Measuring Point Name
    Symbol Name

    Hole Diameter

    mm (in.)
    A, a Roof Panel Corner -
    B, b Upper Back Reinforcement/Quarter Panel Adjoining Portion -
    C, c Upper Back Reinforcement/Quarter Panel Adjoining Portion -
    D, d Quarter Panel End Housing / Luggage Compartment Opening Trough Adjoining Portion -
    E, e Quarter Panel Standard Hole φ13 (0.51)
    F, f Trim Installation Hole φ8.5 (0.33)
    G, g Trim Installation Hole φ8.5 (0.33)
    H Lock Striker Installation Nut M8 (0.31)
    J, j Quarter Wheel House Cover Standard Hole φ13 (0.51)
    K, k Rear Suspension Installation Hole φ9.5 (0.37)
    L, l Center Body Pillar Assembly Mark -
    A01IVROE01

  2. for TMMK Made

    Tech Tips


    • In cases in which only one dimension is given, left and right are symmetrical.

    • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

    Measuring Point Name
    Symbol Name

    Hole Diameter

    mm (in.)
    A, a Roof Panel Corner -
    B, b Upper Back Reinforcement/Quarter Panel Adjoining Portion -
    C, c Upper Back Reinforcement/Quarter Panel Adjoining Portion -
    D, d Quarter Panel End Housing / Luggage Compartment Opening Trough Adjoining Portion -
    E, e Quarter Panel Standard Hole φ13 (0.51)
    F, f Trim Installation Hole φ8.5 (0.33)
    G, g Trim Installation Hole φ8.5 (0.33)
    H Lock Striker Installation Nut M8 (0.31)
    J, j Rear Floor Crossmember Standard Hole φ13 (0.51)
    K, k Rear Suspension Installation Hole φ9.5 (0.37)
    L, l Center Body Pillar Assembly Mark -
    A01IVKLE01