ENGINE COMPARTMENT THREE-DIMENSIONAL DISTANCE
Tech Tips
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
-
Point L, l and M, m on the vehicle are asymmetrical.
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Front fender installation nut | M6 (0.24) |
| B, b | Front fender installation nut | M6 (0.24) |
| C, c | Front fender installation nut | M6 (0.24) |
| D, d | Hood hinge installation nut | M8 (0.31) |
| E | Cowl top inner panel center mark | - |
| F, f | Front apron standard hole | φ8 (0.31) |
| G, g | Front apron standard hole | φ8 (0.31) |
| h | Hood lock support installation nut | M6 (0.24) |
| i | Hood lock support installation nut | M6 (0.24) |
| J, j | Radiator support to front fender bracket standard hole | φ15 (0.59) |
| K, k | Radiator support standard hole | φ10 (0.39) |
| L, l | Radiator support standard hole | φ10 (0.39) |
| M, m | Radiator upper support standard hole | φ10 (0.39) |
| N, n | Radiator upper support standard hole | φ9 (0.35) |
| O, o | Cowl top side inner panel standard hole | φ10 (0.39) |
| *a | Vehicle Dimensions | *b | Height from Imaginary Datum Line |
| *c | mm (in.) |
- | - |