ROOF PANEL(for Standard Roof) ASSEMBLY REPLACEMENT


  1. 3 Door

    A002JHD

    1. REMOVAL

      Symbol Meaning
      B001C30 Remove Weld Points
      A002JIV

    2. INSTALLATION

      Symbol Meaning
      B001C57 Plug Weld
      B001C5F Body Sealer

        INSTALLATION POINT

      1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

      2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

      3. After the roof panel reinforcement is welded to the new parts, install the roof panel to the vehicle side.

      4. Before temporarily installing the new parts, apply body sealer to the windshield header panel and roof panel reinforcement.

        Tech Tips

        Apply just enough body sealer for the new parts to make contact.

      5. After welding, apply the foamed sealing material to the corresponding parts. (See the painting / coating)

      6. After welding, apply body sealer to the corresponding parts. (See the painting / coating)

      7. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

      A002JCU
      A002JK8

  2. 5 Door

    A002JGD

    1. REMOVAL

      Symbol Meaning
      B001C30 Remove Weld Points
      A002JO4

    2. INSTALLATION

      Symbol Meaning
      B001C57 Plug Weld
      B001C5F Body Sealer

        INSTALLATION POINT

      1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

      2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

      3. After the roof panel reinforcement is welded to the new parts, install the roof panel to the vehicle side.

      4. Before temporarily installing the new parts, apply body sealer to the windshield header panel and roof panel reinforcement.

        Tech Tips

        Apply just enough body sealer for the new parts to make contact.

      5. After welding, apply the foamed sealing material to the corresponding parts. (See the painting / coating)

      6. After welding, apply body sealer to the corresponding parts. (See the painting / coating)

      7. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

      A002JNX
      A002JMW