REAR FLOOR PAN(for 5 Door) ASSEMBLY REPLACEMENT



  1. REMOVAL

    Symbol Meaning
    B001C30 Remove Weld Points
    B001C6K Remove Weld Points

      REMOVAL POINT

    1. Remove the rear floor side center panel at the same time.

    A002JLCC02
    *A LH Side *B RH Side
    *1 Rear Floor Side Center Panel - -

  2. INSTALLATION

    Symbol Meaning
    B001C44 Spot Weld
    B001C57 Plug Weld
    B001C4M Plug Weld
    B001C3I Fillet Weld

      INSTALLATION POINT

    1. Before temporarily installing the new parts, weld the rear floor side center panel, rear floor plate bracket and weld bolts with the standard number of welding points.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A002JIXC02
    *A Upper Face *B Lower Face
    *C w/ Rear Air Conditioning System *D w/ Sub Tank
    *1 Rear Floor Side Center Panel *2 Rear Floor Plate Bracket
    *3 Weld Bolts - -
    A002JHSC02
    *A LH Side *B RH Side