BODY LOWER BACK PANEL(for 5 Door) CUT AND JOIN REPLACEMENT SECTIONS (LARGE AREAS)



  1. REMOVAL / INSTALLATION

    Symbol Meaning
    B001C30 Remove Weld Points
    B001C21 Remove Weld Points
    B001C6K Remove Weld Points
    B001C1V Cut and Join Location
    A002JN7 Spot Weld
    B001C57 Plug Weld
    B001C5L Plug Weld
    B001C4M Plug Weld
    B001C5R Butt Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. *a is only for installation.

    4. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A002JJFC02
    *A LH Side - -
    *b mm (in.) - -
    A002JJJC02
    *A LH Side - -
    A002JGUC01
    *A RH Side - -
    *b mm (in.) - -
    A002JE2C02
    *A RH Side - -