ENGINE COMPARTMENT REFERENCE VALUES THREE-DIMENSIONAL DISTANCE
Tech Tips
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
-
These values are actual measurements made on model. Use these reference values.
-
Measure points with the radiator support upper seal and front fender top reinforcement removed.
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Radiator grill installation clip | - |
| B, b | Headlight installation screw | - |
| C, c | Headlight installation screw | - |
| D, d | Front fender installation bolt | - |
| E, e | Front fender installation bolt | - |
| F, f | Front fender installation bolt | - |
| *a | Vehicle Dimensions | *b | mm (in.) |