BACK DOOR(for 5 Door) THREE-DIMENSIONAL DISTANCE
Tech Tips
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
-
Point A, a, B, b, F, f and I, i on the vehicle are asymmetrical.
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Roof panel corner | - |
| B, b | Roof side inner rear panel corner | - |
| C, c | Quarter panel standard hole | φ13 (0.51) |
| D | Back door hinge installation nut | M8 (0.31) |
| e | Back door lock striker installation nut | M8 (0.31) |
| F, f | Lower back upper gusset corner | - |
| G | Back door hinge installation nut | M8 (0.31) |
| h | Back door side male stopper installation nut | M6 (0.24) |
| I, i | Rear finish plate installation nut | φ8.5 (0.335) |
| J, j | Rear floor pan reinforcement standard hole | φ10 (0.39) |
| K, k | Center body pillar assembly mark | - |
| *a | Vehicle Dimensions | *b | mm (in.) |