UNDER BODY REFERENCE VALUES THREE-DIMENSIONAL DISTANCE

Tech Tips


  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

  • These values are actual measurements made on model. Use these reference values.

  • Measure points with the engine under cover No. 1 and front floor cover removed.

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A, a Side rail reinforcement installation bolt -
B, b Side rail reinforcement installation bolt -
C, c Front suspension crossmember installation bolt -
D, d Front suspension crossmember installation bolt -
E, e Front side inner rear member standard hole φ18 (0.71)
A002KH1C01
*a Vehicle Dimensions *b

mm

(in.)