ENGINE COMPARTMENT THREE-DIMENSIONAL DISTANCE
Tech Tips
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Radiator upper support standard hole | φ13 (0.51) |
| B, b | Front spring support hole (inner) | φ12.5 (0.492) |
| C, c | Hood hinge installation nut | M8 (0.31) |
| D | Cowl top panel center mark | - |
| E, e | Front side member standard hole | φ18 (0.71) |
| F | Front side member standard hole | φ10 (0.39) |
| f | Engine mounting bracket installation nut (rear) | M12 (0.47) |
| G, g | Radiator upper support installation nut | M6 (0.24) |
| H, h | Front bumper reinforcement installation nut | M10 (0.39) |
| I, i | Radiator side support standard hole | φ10 (0.39) |
| J, j | Front fender extension standard hole | φ10 (0.39) |
| K, k | Radiator upper support installation nut | M6 (0.24) |
| L, l | Front fender installation nut | M6 (0.24) |
| M, m | Front fender installation nut | M6 (0.24) |
| *a | Vehicle Dimensions | *b | Height from Imaginary Datum Line |
| *c | mm (in.) |
- | - |