CAUTION LABEL ATTACHMENT POSITION
-
After using a degreasing agent to clean the surfaces of the body where the caution labels will be attached, attach the caution labels to the positions shown in the illustration.
Tech Tips
-
Attach each caution label with its orientation the same as the numbers shown in the illustration.
-
Make sure the caution label is not attached over a spot weld.
-
When attaching the caution label, make sure not to touch the label's adhesive surface.
-
To prevent the edges of the caution label from peeling, apply extra pressure to the label's periphery.
-
If the work area's temperature is 5°C or less, the caution label's adhesive will deteriorate. It is recommended that you heat the label to 20 to 40°C.
-
| *1 | ECE Smoke Approved Number Plate | *2 | A/C Information Label |
| *3 | Combustion Heater Label | *4 | Coolant Notice Label |
| *5 | Fuel Label | *6 | Child Protection Label |
| *A | LHD | *B | RHD |
| *1 | Side Airbag Caution Label | *2 | Tire Pressure Information Label |
| *3 | Name Label | - | - |