REAR FLOOR UPPER CENTER CROSSMEMBER ASSEMBLY REPLACEMENT



  1. REMOVAL / INSTALLATION

    Symbol Meaning
    A002KEA Remove Weld Points
    A002KB1 Cut with Disc Sander etc.
    A002KAA Plug Weld
    A002KB7 Fillet Weld

      REMOVAL POINT

    1. Remove the rear absorber mounting No. 1 bracket and rear floor side plate at the same time.


      INSTALLATION POINT

    1. *a is only for installation.

    2. After welding, apply undercoating to the corresponding parts. (See the painting / coating)

    3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A002KD5C01
    *1 Rear Absorber Mounting No. 1 Bracket *2 Rear Floor Side Plate
    A002KHKC01
    *A LH Side *B RH Side
    *b mm (in.) - -