REAR FLOOR PAN ASSEMBLY REPLACEMENT



  1. REMOVAL

    Symbol Meaning
    A002KEA Remove Weld Points

      REMOVAL POINT

    1. Remove the rear floor pan reinforcement at the same time.

    A002KD6C01
    *A LH Side *B RH Side
    *1 Rear Floor Pan Reinforcement - -

  2. INSTALLATION

    Symbol Meaning
    A002KAA Plug Weld
    A002KB7 Fillet Weld

      INSTALLATION POINT

    1. Before temporarily installing the new parts, weld the spare wheel clamp bracket, rear floor pan reinforcement and weld bolts with the standard number of welding points.

    2. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A002KBIC01
    *A Upper Face *B Lower Face
    *1 Spare Wheel Clamp Bracket *2 Rear Floor Pan Reinforcement
    *3 Weld Bolts - -
    A002KBDC01
    *A LH Side *B RH Side