FRONT SIDE MEMBER CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)



  1. REMOVAL / INSTALLATION

    Symbol Meaning
    A002KEA Remove Weld Points
    A002KDT Cut and Join Location
    A002KAA Plug Weld
    A002KBL Butt Weld

      REMOVAL POINT

    1. Carefully cut the front side member so not to damage *b.

    2. These values are reference values.


      INSTALLATION POINT

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. *a is only for installation.

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A002KD1C01
    *A RH - -
    *c mm (in.) - -
    A002KFSC01
    *A LH *B RH
    *c mm (in.) - -