BODY PANEL SEALING APPLICATION AREAS


  1. Be sure to apply body sealer to the body panel joints and door edges (tip of outer panel folded part), etc., to waterproof and rustproof them.

    Tech Tips


    • Apply degreasing agent to a clean cloth and clean the sealer application areas.

    • After removing the applied spot sealer from the sealer application areas using thinner or equivalent, rustproof the areas by applying primer or equivalent. Then apply body sealer.

    • If sealer is unnecessarily applied to an area, apply degreasing agent to a clean cloth and clean off the body sealer immediately.

A002KX1 Flat Finishing A002KWH No Flat Finishing
A002KURC01
*A Cold Area *B Except Cold Area
A002KRT
A002KQRC01
*A Cold Area *B Except Cold Area
A002KVE
A002KW1
A002KY9