REAR FLOOR REAR CROSS OUTER PANEL CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)

A002KVK

  1. REMOVAL / INSTALLATION

    Symbol Meaning
    A002KR5 Remove Weld Points
    A002KY8 Remove Weld Points
    A002KW2 Cut and Join Location
    A002KTS Spot Weld
    A002KXU Plug Weld
    A002KR9 Plug Weld
    A002KUS Butt Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. After welding, apply undercoating to the corresponding parts. (See the painting / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A002KWTC01
    *a mm (in.) - -