BACK DOOR OPENING TROUGH ASSEMBLY REPLACEMENT



  1. REMOVAL / INSTALLATION

    Symbol Meaning
    A002KYI Remove Weld Points
    A002KR5 Remove Weld Points
    A002KY8 Remove Weld Points
    A002KRC Plug Weld
    A002KXU Plug Weld
    A002KR9 Plug Weld

      REMOVAL POINT

    1. Remove the door lock striker retainer at the same time.


      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. *a is only for installation.

    4. After welding, apply body sealer to the corresponding parts. (See the painting / coating)

    5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A002KV1C01
    *1 Door Lock Striker Retainer *2 Back Door Opening Lower Reinforcement
    A002KWM