ROCKER REAR PANEL CUT AND JOIN REPLACEMENT SECTIONS

A002KU5

  1. REMOVAL

    Symbol Meaning
    A002KYI Remove Weld Points
    A002KW2 Cut and Join Location
    A002KR4 Cut Location for Supply Parts

      REMOVAL POINT

    1. After removing the quarter panel, remove the rocker panel No. 3 reinforcement.

    A002KR3C01
    *1 Quarter Panel - -
    *a mm (in.) - -

  2. INSTALLATION

    Symbol Meaning
    A002KQT Spot Weld
    A002KRC Plug Weld
    A002KUS Butt Weld
    A002KW6 Body Sealer

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. Before installing a new part, apply body sealer.

      Tech Tips

      Apply sealer in an even, continuous bead.

    4. After welding the rocker panel No. 3 reinforcement to the vehicle side, install the quarter panel.

    5. After welding, apply body sealer to the corresponding parts. (See the painting / coating)

    6. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A002KVHC01
    *1 Quarter Panel - -