FRAME THREE-DIMENSIONAL DISTANCE


  1. Upper Face

    Tech Tips

    For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

    Measuring Point Name
    Symbol Name

    Hole Diameter

    mm (in.)
    A, a Front bamper extension No. 2 installation bolt M10 (0.39)
    B, b No. 1 body mounting hole φ26 (1.02)
    C, c Front spring support hole φ12.2 (0.480)
    D, d No. 2 body mounting hole φ43 (1.69)
    E, e Side rail inner channel standard hole 16X16 (0.63X0.63)
    F, f No. 3 body mounting hole φ43 (1.69)
    G, g No. 4 body mounting hole φ43 (1.69)
    A002KW0C01
    *A RH *B LH
    *C Front - -
    *a Imaginary Datum Line *b

    mm

    (in.)

  2. Lower Face

    Tech Tips

    For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

    Measuring Point Name
    Symbol Name

    Hole Diameter

    mm (in.)
    A, a Front bamper extension No. 2 installation bolt M10 (0.39)
    B, b Front stabilizer bracket installation nut M12 (0.47)
    C, c Suspension lower arm installation hole - rear 42X24 (1.65X0.94)
    D, d Suspension lower arm installation hole - front 36.5X18.5 (1.437X0.728)
    E, e Side rail inner channel standard hole 16X16 (0.63X0.63)
    F, f Lower control arm installation hole - inner φ16.5 (0.650)
    G, g Upper control arm installation hole - inner φ14.5 (0.571)
    H, h Rear shock absorber installation hole φ29.5 (1.161)
    I Lateral control rod installation hole - front φ15 (0.59)
    J, j Transport hook installation nut M12 (0.47)
    A002KV5C01
    *A RH *B LH
    *C Front - -
    *b Imaginary Datum Line *c Vehicle Dimensions
    *d Heavy Duty *e Light Duty
    *f

    mm

    (in.)

    		 - -