LUGGAGE DOOR THREE-DIMENSIONAL DISTANCE

Tech Tips


  • In cases in which only one dimension is given, left and right are symmetrical.


  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A, a Roof Panel Corner -
B, b Quarter Panel Standard Hole φ10 (0.39)
C, c Luggage Compartment Door Opening Trough Corner -
D, d Quarter Panel Outer Extension Corner -
E, e Quarter Panel Standard Hole φ13 (0.51)
F, f Rear Finish Plate Installation Hole φ8.5 (0.34)
G, g Luggage Compartment Door Lock Striker Installation Nut M8 (0.31)
H, h Rear Floor Side Member Reinforcement Standard Hole φ18 (0.71)
J, j Rear Floor Side Member Reinforcement Standard Hole φ18 (0.71)
A003Q5GE01
*1 Distance between points other than those above
*2 mm (in.)