ROCKER PANEL CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)

A003Q6B

  1. REMOVAL

    Symbol meaning
    A003QEL Remove Weld Points
    A003Q7Y Cut and Join Location
    A003Q7I Cut Location for Supply Parts
    A003QCUE01

  2. INSTALLATION

    Symbol meaning
    A003Q8E Plug Weld
    A003Q60 Butt Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. After welding, apply body sealer to the corresponding parts. (See the painting / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A003QASE01
    *1 CENTER BODY PILLAR OUTER
    *2 Laser Screw Welding