RADIATOR SUPPORT ASSEMBLY REPLACEMENT

A003QFI

  1. REMOVAL

    Symbol meaning
    A003QEL Remove Weld Points

      REMOVAL POINT

    1. *1: Bolts.

    2. Perform the replacement with the *2 attached to the vehicle.

    3. If the *2 is damaged, replace the *2.

    A003QFGE01
    A003QDHE01

  2. INSTALLATION

    Symbol meaning
    A003Q8E Plug Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. *1: Bolts.

    4. After removing and installing the millimeter wave radar sensor assembly, perform the necessary adjustments.

    5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    6. Measure the dimensions before installing the headlights.

    Reference Value
    Area Measurement Area Measurement
    *a 1401 mm (55.16 in.) *b 985 mm (38.78 in.)
    *c 786 mm (30.94 in.) *d 1025 mm (40.35 in.)
    *e 978 mm (38.50 in.) *f 1099 mm (43.27 in.)
    *g 240 mm (9.45 in.) - -
    A003Q7SE01
    A003QD9E01
    *1 LH Side:
    *2 FRONT BUMPER ARM MOUNTING BRACKET
    *3 RH Side:
    A003Q69E01
    *1 for LHD:
    *2 for RHD: