REAR FLOOR SIDE MEMBER CUT AND JOIN REPLACEMENT SECTIONS



  1. REMOVAL

    Symbol meaning
    A003QEL Remove Weld Points
    A003QCY Remove Weld Points
    A003Q7Y Cut and Join Location
    A003Q8QE03
    A003Q85E03

  2. INSTALLATION

    Symbol meaning
    A003Q8E Plug Weld
    A003QDJ Plug Weld
    A003Q60 Butt Weld

      INSTALLATION POINT

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. After welding the rear floor side member reinforcement sub-assembly rear to the vehicle side, install the rear floor side panel sub-assembly.

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A003Q6DE02
    *1 REAR FLOOR SIDE PANEL SUB-ASSEMBLY
    *2 REAR FLOOR SIDE MEMBER REINFORCEMENT SUB-ASSEMBLY REAR
    A003Q9EE03
    *1 REAR FLOOR SIDE PANEL SUB-ASSEMBLY
    *2 REAR FLOOR SIDE MEMBER REINFORCEMENT SUB-ASSEMBLY REAR