BODY PANEL SEALING APPLICATION AREAS


  1. Be sure to apply body sealer to the body panel joints and door edges (tip of outer panel folded part), etc., to waterproof and rustproof them.

    Tech Tips


    • Apply degreasing agent to a clean cloth and clean the sealer application areas.

    • After removing the applied spot sealer from the sealer application areas using thinner or equivalent, rustproof the areas by applying primer or equivalent. Then apply body sealer.

    • If sealer is unnecessarily applied to an area, apply degreasing agent to a clean cloth and clean off the body sealer immediately.

A003QN1 Flat Finishing A003QLS No Flat Finishing
A003QP4
A003QJK
A003QR6E02
*1 LH Side:
*2 RH Side:
A003QJCE05
*1 LH Side:
*2 RH Side:
A003QLR
A003QGX