ENGINE COMPARTMENT REFERENCE VALUES THREE-DIMENSIONAL DISTANCE

Tech Tips


  • Measure points with the cool air intake duct seal, engine room side cover, front pillar to front side seal , cowl top ventilator protector and side ventilator cover plate stiffener removed.

  • In cases in which only one dimension is given, left and right are symmetrical.

  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A, a Front Fender Installation Bolt M6 (0.24)
B, b Radiator Upper Support Installation Bolt M6 (0.24)
C, c Front Fender Installation Bolt M6 (0.24)
D, d Front Fender Installation Bolt M6 (0.24)
E, e Front Fender Installation Bolt M6 (0.24)
A003QRAE01
*1 Distance between points other than those above
*2 mm (in.)