FRONT SUSPENSION CROSSMEMBER TWO-DIMENSIONAL DISTANCE

Tech Tips


  • Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

  • In cases in which only one dimension is given, left and right are symmetrical.

  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A, a Front Suspension Crossmember Installation Hole φ24 (0.94)
B, b Power Steering Link Installation Hole φ14.6 (0.57)
C, c Front Suspension Lower Arm Installation Hole

16.2X23

(0.64X0.91)
D, d Engine Mounting Front Insulator Installation Hole φ14 (0.55)
E, e Front Suspension Lower Arm Installation Hole

21.2X29

(0.84X1.14)
F, f Front Suspension Crossmember Installation Hole φ24 (0.94)
A003QPJE01
A003QMNE01